Magnetic Sensors

CS-31 - High temperature (Bracket or clamp mount)

SPECIFICATIONS

Type CS-31R
Wiring Method 2-Wire Type
Switching Logic SPST, Normally Open
Sensor type Reed Switch
Operating Voltage 5~240V DC/AC
Switching Current 500mA max.
Contact Rating (NOTE 1) 10W max.
Current Consumption --
Voltage Drop 0.5V max.
Leakage current --
Indicator None
Cable Ø3.0, 2C, Teflon
Operating Frequency 200 Hz
Magnet Requirement (NOTE 2) 40 Gauss Parallel
Temperature Range -10~140℃ (+14~284℉)
Shock (NOTE 3) 30 G
Vibration (NOTE 4) 9 G
Enclosure Classification IEC 60529 IP67 (NEMA 6)
Protection Circuit (NOTE 5) None

NOTE:

  1. WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
  2. Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
  3. Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
  4. Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.
  5. 1=None / 2=Short-circuit / 3=Power Source Reverse polarity / 4=Surge Suppression