CS-36D, CS-36N, CS-36P
SPECIFICATIONS
| Type | CS-36D | CS-36DE | CS-36N | CS-36NE | CS-36P | CS-36PE |
| Wiring Method | 2-Wire type | 2-Wire type | 3-Wire type | 3-Wire type | 3-Wire type | 3-Wire type |
| Switching Logic | Solid State Output, Normally Open | Solid State Output, Normally Open | Solid State Output, Normally Open | Solid State Output, Normally Open | Solid State Output, Normally Open | Solid State Output, Normally Open |
| Sensor type | - | - | NPN Current Sinking | NPN Current Sinking | PNP Current Sourcing | PNP Current Sourcing |
| Operating Voltage | 10~28V DC | 5~30V DC | 4.5~28V DC | 5~30V DC | 4.5~28V DC | 5~30V DC |
| Switching Current | 4~20mA max. | 50mA max. | 50mA max. | 50mA max. | 50mA max. | 50mA max. |
| Contact Rating (NOTE 1) | 0.6W max. | 1.5W max. | 1.5W max. | 1.5W max. | 1.5W max. | 1.5W max. |
| Current Consumption | - | - | 10mA @ 24V DC max. | 10mA @ 24V DC max. | 10mA @ 24V DC max. | 10mA @ 24V DC max. |
| Voltage Drop | 3.5V max. | 3.5V max. | 0.5V @ 50mA max. | 0.5V @ 50mA max. | 0.5V @ 50mA max. | 0.5V @ 50mA max. |
| Leakage current | 0.8mA max. | 0.1mA(40uA) max. | 0.01mA max. | 0.01mA max. | 0.01mA max. | 0.01mA max. |
| Indicator | Red LED | Red LED | Red LED | Red LED | Red LED | Red LED |
| Cable | ø2.8, 2C, PU | ø2.8, 2C, PU | ø2.8, 3C, PU | ø2.8, 3C, PU | ø2.8, 3C, PU | ø2.8, 3C, PU |
| Operating Frequency | ø2.8, 2C, PU | ø2.8, 2C, PU | ø2.8, 3C, PU | ø2.8, 3C, PU | ø2.8, 3C, PU | ø2.8, 3C, PU |
| Magnet Requirement (NOTE 2) | 40Gauss | 40~1000Gauss | 40Gauss | 40~1000Gauss | 40Gauss | 40~1000Gauss |
| Temperature Range | -10~70˚C (+14~158˚F) | -10~70˚C (+14~158˚F) | -10~70˚C (+14~158˚F) | -10~70˚C (+14~158˚F) | -10~70˚C (+14~158˚F) | -10~70˚C (+14~158˚F) |
| Shock (NOTE 3) | 50G | 50G | 50G | 50G | 50G | 50G |
| Vibration (NOTE 4) | 9G | 9G | 9G | 9G | 9G | 9G |
| Enclosure Classification | IEC 60529 IP67 (NEMA 6) | IEC 60529 IP67 (NEMA 6) | IEC 60529 IP67 (NEMA 6) | IEC 60529 IP67 (NEMA 6) | IEC 60529 IP67 (NEMA 6) | IEC 60529 IP67 (NEMA 6) |
| Protection Circuit (NOTE 5) | 4 | 3,4 | 3,4 | 3,4 | 3,4 | 3,4 |
NOTE:
- WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
- Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
- Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
- Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.
- 1=None / 2=Short-circuit / 3=Power Source Reverse polarity / 4=Surge Suppression
