Magnetic Sensors

CS-53 - For SMC T-slot (Slide-in type)

Image

CS-53R, CS-53N, CS-53P, CS-53RP

Image

SPECIFICATIONS

Type CS-53R CS-53N CS-53P CS-53RP
Wiring Method 2-Wire Type 3-Wire Type 3-Wire Type 3-Wire Type
Switching Logic SPST, Normally Open Solid State Output, Normally Open Solid State Output, Normally Open SPST, Normally Open
Sensor type Reed Switch NPN Current Sinking PNP Current Sourcing Reed Switch
Operating Voltage 5~240V DC/AC 10~30V DC 10~30V DC 10~30V DC/AC
Switching Current 100mA max. 100mA max. 100mA max. 500mA max.
Contact Rating (NOTE 1) 10W max. 3W max. 3W max. 10W max.
Current Consumption - 8mA@24V DC max. 8mA@24V DC max. 10mA@24V DC max.
Voltage Drop 3.5 V max. 1.5 V max. 1.5 V max. 0.1 V@100mA max.
Leakage current - 0.01 mA max. 0.01 mA max. -
Indicator Red LED Red LED Yellow LED Yellow LED
Cable Ø3, 2C, PUR Ø3, 3C, PUR Ø3, 3C, PUR Ø3, 3C, PUR
Operating Frequency 200Hz 1000Hz 1000Hz 200Hz
Magnet Requirement (NOTE 2) 70 Gauss Parallel 50 Gauss Parallel 50 Gauss Parallel 70 Gauss Parallel
Temperature Range -10~70℃ (+14~158℉) -10~70℃ (+14~158℉) -10~70℃ (+14~158℉) -10~70℃ (+14~158℉)
Shock (NOTE 3) 30 G 50 G 50 G 30 G
Vibration (NOTE 4) 9 G 9 G 9 G 9 G
Enclosure Classification IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6)
Protection Circuit (NOTE 5) 1 2, 3, 4 2, 3, 4 1

NOTE:

  1. WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
  2. Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
  3. Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
  4. Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.
  5. 1=None / 2=Short-circuit / 3=Power Source Reverse polarity / 4=Surge Suppression