Magnetic Sensors

CS-6200 - For 2"~8" tie-rod cylinder (Integral clamp)

Image

CS-6200R, CS-6200N, CS-6200P

Image

SPECIFICATIONS

Type CS-6200R CS-6200N CS-6200P
Wiring Method 2-Wire Type 3-Wire Type 3-Wire Type
Switching Logic SPST, Normally Open Solid State Output, Normally Open Solid State Output, Normally Open
Sensor type Reed Switch NPN Current Sinking PNP Current Sourcing
Operating Voltage 5~240V DC/AC 5~30V DC 5~30V DC
Switching Current 1 Amp. max. 1 Amp. max. 1 Amp. max.
Contact Rating (NOTE 1) 30W max. 30W max. 30W max.
Current Consumption - 42mA@24V DC max. 30mA@24V DC max.
Voltage Drop 3.5V max. This email address is being protected from spambots. You need JavaScript enabled to view it. max. This email address is being protected from spambots. You need JavaScript enabled to view it. max.
Leakage current - 0.01mA max. 0.01mA max.
Indicator Red LED Power: Green LED, Output: Red LED Power: Green LED, Output: Red LED
Cable Ø4.5 PVC - 24 AWG ( 0.22 mm² ) - 2 cores Ø4.5 PVC - 24 AWG ( 0.22 mm² ) - 3 cores Ø4.5 PVC - 24 AWG ( 0.22 mm² ) - 3 cores
Operating Frequency 200Hz 1000Hz 1000Hz
Magnet Requirement (NOTE 2) 80 Gauss 45 Gauss 45 Gauss
Temperature Range -10~70℃ (+14~158℉) -10~70℃ (+14~158℉) -10~70℃ (+14~158℉)
Shock (NOTE 3) 30 G 50 G 50 G
Vibration (NOTE 4) 9 G 9 G 9 G
Enclosure Classification IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6) IEC 60529 IP67 (NEMA6)
Protection Circuit (NOTE 5) 4 3, 4 3, 4

NOTE:

  1. WARNING: Never exceed rating (Watt=Voltage x Amperage). Permanent demage to sensor will occur.
  2. Measuring standard target: ø15.5Xø8X5t (Anisotropy rubber magnet)
  3. Sin wave / X , Y , Z 3 directions / 3 times each direction / 11 ms each time.
  4. Double amplitude 1.5 mm / 10Hz~55Hz~10Hz (Sweep 1 min) / X , Y , Z 3 directions / 1 hour each time.
  5. 1=None / 2=Short-circuit / 3=Power Source Reverse polarity / 4=Surge Suppression